Depending on your location, people are reliant on the air conditioner to provide comfort indoors from about May through September, and in the Vegas Valley even longer! Through routine maintenance and care, the air conditioner can last longer in optimal condition and significantly reduce the need for repairs. When it comes the standard operation of the air conditioning system, knowing the basics can help people better care for and even help recognize potential problems. To help you understand the air conditioner, we at Air Supply Heating & Air Conditioning would like to share the basic parts that function together to cool your home and business.
The evaporator is close to the near the furnace and is usually located inside the building. The condenser is connected to the evaporator with a very thin pipe. In order to enter into the part of the cooling system, the high-pressure gas converts in low-pressure liquid. The liquid is altered into the gas form due to the decreasing pressure in the evaporator. To leave the indoor space cool, the heat is absorbed from the air as the working fluid, or refrigerant, comes out of the evaporator. The working fluid comes out of the evaporator in the form of a gas next. This continues on an everlasting cycle as the refrigerant does not get used during the process.
Air Conditioner Condenser Coil
To fit into the condenser coil is a fan, the high-pressure gas is cooled down to be converted back to a liquid form. Through the evaporator, the refrigerant moves onto the next the part of the conditioner, as it is now in the liquid state. Housed in the unit outside the building is where the compressor and condenser can be discovered.
In regard to the air conditioner, the motor compressors are in simplified terms. Easily transforming from gas into a liquid, the compressor performs to convert low-pressure gas into a high-pressure, high-temperature gas using a working fluid, also known as refrigerant. From the gap regions between molecules that get narrowed down, the process produces energized gas is produced. The refrigerant enters the condenser as it comes from the compressor.
Air Ducts / Ductwork
To dispense the cool air into the individual rooms throughout the building, the air ducts are a series of metal or fiberglass tubing funneling the air. In order to ensure cost-effective and efficient cool air dispersal, the air ducts need to be tightly connected and sealed. The cool air you paid for is lost should they leak prior to it reaching its destination.
There are features the thermostat can be set manually or automatically, depending on the type of thermostat. In order to maintain and control the indoor temperatures, the thermostat is a necessary device that regulate the heat energy flowing inside and outside of the air conditioner system.
Air Handler / Blower Unit
To draw room air to the evaporator and spreads the cool air all over your house with two components working in tandem. The air is equally dispersed with the ductwork assisting.